Plibrico®
Plastic Refractories
   The original plastic refractory. A moist, putty like material that can be molded into shape to form the desired
lining configuration. Available in air and chemical setting formulations for lining service temperatures up to 3400 degrees F.

Plibrico® Plastic Refractory

HyRATE®
Gunning Plastics
The HyRate® process combines the speed and ease of installation allowed by gunning, with the technology of
plastic refractories. The uniquely developed HyRate® plastics are a restructured plastic refractory, designed for
pneumatic placement, while retaining all the benificial properties of the grades from which they were derived.

Plibrico® Plastic Refractories
for
Pneumatic Application
HyRate® Gunning Plastics require specialized pneumatic gunning equipment.

PLICAST®
Conventional Castable Refractories
Plicast® castable refractrories that are a dry material to which water is added to enable application placements.
Numerous formulations are available to meet application requirements.

Plibrico® Conventional Castable Refractories

AL-TUFF® SYSTEM

Plicast Al-Tuff® Castable and Gun Mixes
for
Aluminum Contact

AL-SHIELD® SYSTEM

Plicast Al-Shield™ Castable and Gun Mixes
for
Aluminum Contact

HyMOR® and Super HyMOR®
LOW CEMENT
Castable Refractories

  HyMOR® and Super HyMOR® castables are the original low cement castables for applications requiring superior hot strengths
and the ability to resist abrasion. With years of proven cost-effective service in severe environment.

Plicast HyMOR® and Plicast Super HyMOR®
Castable Refractories

SI-BOND
CEMENT FREE
Castable Refractories

Plicast® SI-BOND
Castable Refractories

HyRezist®
ABRASION RESISTANT
Castable Refractories

The HyRezist® family has a low moisture design for applications that demand abrasion resistant qualities, and the strength to
stand up to abusive operating conditions. HyRezist® products also offer inherent flow properties that make placement simple.
An excellant performer at low-to-intermediate temperature ranges.
Also available in gunning grades formulated for application placement via pneumatic gunning.

Plicast HyRezist®
Castable Refractories

EXO-SET ™
CHEMICAL BOND
Castable Refractories

A two component quick setting refractory. Excellent material for repairs.

Exo-Set™
Castable Refractories

EXO-SET™ UNO 
CHEMICAL BOND
Castable Refractories

A one component quick setting refractory.

Exo-Set Uno™
Castable Refractories

PLICAST LWI®
Insulating Castable Refractories

 LWI® lightweight insulating refractories for use as backup or for medium temperature lining applications. Also
available in gunning grades formulated for placement via pneumatic gunning.

PLICAST LWI®
Insulating Castable Refractories

PLISHOT™
Castable Refractories
For Shotcrete Application

Plishot Castable Refractories

PLIFLOW™
FREE FLOW / SELF LEVELING
Castable Refractories

Pliflow™ Castable Refractories

PLIGUN®
Refractories
For Gunite Application

Pligun® Gun Mix Refractories

PLISTIX®
Servicing Mix Refractories

  Plistix® servicing and patching mixes are designed to increase the life expectancy of working linings in severe applications.
Material can be directly applied to existing linings, regardless of makeup, without any special preparation,
and are capable of withstanding slag attack and many different atmospheric conditions.

Plistix® Service Mix Refractories

PLISTIX® INJEC-TITE
Injection Mixes

  A pumpable refractory process for general boiler and furnace repair applications. The ceramic fiber based
injection mix is designed to restore worn insulation and fill voids between a refractory lining and shell. Material
is applied through furnace exterior via pneumatic pump, while the unitis either on-line or down.

Plistix® Injec-Tite Injection Mixes

DEMON®
Refractory Mortar

Air setting refractory mortar for use in laying firebrick.
 
Demon® Refractory Mortar

Our Warehouse Locations

You may order Plibrico Refractory Products
from any of the following F.S. Sperry Company Offices.

Our offices are located through out the Mid-South to provide you with fast and easy service.